Support for Build Automation Systems

Make and its variants

Coco can also generate code coverage information for a project without the need to modify it. The principle is to prepend to the PATH variable the path of the CoverageScanner compiler wrappers and to set the instrumentation parameters with the COVERAGESCANNER_ARGS environment variable. To activate the instrumentation, --cs-on must be present in COVERAGESCANNER_ARGS. If this is not the case, CoverageScanner is completely deactivated.

Note: The variable COVERAGESCANNER_ARGS should only be set locally, e.g. in a script or on the command line. If it is set globally, it will influence every build.

GNU Make

On a UNIX^® system, proceed as follows to instrument a project which can be generated using GNU Make:

export PATH=/opt/SquishCoco/wrapper/bin:$PATH
export COVERAGESCANNER_ARGS=--cs-on
make clean
make

For macOS, replace the first line with:

export PATH=/opt/SquishCoco/wrapper:$PATH

Microsoft NMake

To instrument a project that is generated with NMake:

set PATH=%SQUISHCOCO%\visualstudio;%PATH%
set COVERAGESCANNER_ARGS=--cs-on
nmake clean
nmake

Microsoft MSBuild

To instrument a project that is generated with MSBuild:

set PATH=%SQUISHCOCO%\visualstudio;%PATH%
set COVERAGESCANNER_ARGS=--cs-on
msbuild /p:UseEnv=true myproject.sln /t:ReBuild

CMake

CMake is a platform independent build tool from Kitware.

Instrumentation with a preloaded script

The following method to set up a CMake project for code coverage should work in all simple cases.

There is a generic file, squishcoco.cmake, and specific setting files (like squishcoco-gcc.cmake) that specifies the compiler. The settings file is then included when the project is configured with CMake, with a command line like

cmake <other options> -Csquishcoco-gcc.cmake

Then the project is configured for code coverage.

If the settings file for a compiler is missing, one can modify one of the existing files to create it.

The file `squishcoco.cmake`

Save the following file as "squishcoco.cmake" in the root directory of your source code. Change the first line so that it contains the options that you need. The list of options must be a quoted string with the options separated by spaces. If no options are present, coverage is enabled.

This file cannot be used on its own (except with Qt Creator) but must be included from a compiler settings file (see below).

set(coverage_flags "--cs-mcdc --cs-no-assignments") # Set your own options

foreach(var IN ITEMS CMAKE_C_COMPILER CMAKE_CXX_COMPILER)
    if(NOT DEFINED ${var})
        message(FATAL_ERROR "Variable ${var} must be defined.")
    endif()
endforeach()

set(CMAKE_C_FLAGS_INIT "${coverage_flags}"
    CACHE STRING "Coverage flags for the C compiler." FORCE)
set(CMAKE_CXX_FLAGS_INIT "${coverage_flags}"
    CACHE STRING "Coverage flags for the C++ compiler." FORCE)
set(CMAKE_EXE_LINKER_FLAGS_INIT "${coverage_flags}"
    CACHE STRING "Coverage flags for the linker." FORCE)
set(CMAKE_SHARED_LINKER_FLAGS_INIT "${coverage_flags}"
    CACHE STRING "Coverage flags to link shared libraries." FORCE)
set(CMAKE_STATIC_LINKER_FLAGS_INIT "${coverage_flags}"
    CACHE STRING "Coverage flags to link static libraries." FORCE)

if (DEFINED ENV{SQUISHCOCO})
    set(cocopath $ENV{SQUISHCOCO})
else()
    find_file(cocopath SquishCoco
      PATHS "$ENV{HOME}" /opt/ "/Applications"
      REQUIRED
      NO_DEFAULT_PATH
    )
endif()

if(CMAKE_HOST_APPLE)
    set(wrapperdir "${cocopath}/")
elseif(CMAKE_HOST_UNIX)
    set(wrapperdir "${cocopath}/bin/")
elseif(MINGW)
    set(wrapperdir "${cocopath}\\bin\\")
else()
    set(wrapperdir "${cocopath}\\" )
endif()

get_filename_component(c_compiler ${CMAKE_C_COMPILER} NAME)
find_program(code_coverage_c_compiler cs${c_compiler}
    PATHS ${wrapperdir}
    REQUIRED NO_DEFAULT_PATH)
set(CMAKE_C_COMPILER "${code_coverage_c_compiler}"
    CACHE FILEPATH "CoverageScanner wrapper for C compiler" FORCE)

get_filename_component(cxx_compiler ${CMAKE_CXX_COMPILER} NAME)
find_program(code_coverage_cxx_compiler cs${cxx_compiler}
    PATHS ${wrapperdir}
    REQUIRED NO_DEFAULT_PATH)
set(CMAKE_CXX_COMPILER "${code_coverage_cxx_compiler}"
    CACHE FILEPATH "CoverageScanner wrapper for C++ compiler" FORCE)

if(DEFINED CMAKE_LINKER)
    get_filename_component(linker_prog ${CMAKE_LINKER} NAME)
    find_program(code_coverage_linker cs${linker_prog}
        PATHS ${wrapperdir}
        REQUIRED NO_DEFAULT_PATH)
    set(CMAKE_LINKER "${code_coverage_linker}"
        CACHE FILEPATH "CoverageScanner wrapper for linker" FORCE)
elseif(${c_compiler} STREQUAL "cl.exe") # special case for Visual Studio
    find_program(code_coverage_linker "cslink.exe"
        PATHS ${wrapperdir}
        REQUIRED NO_DEFAULT_PATH)
    set(CMAKE_LINKER "${code_coverage_linker}"
        CACHE FILEPATH "CoverageScanner wrapper for linker" FORCE)
endif()

if(DEFINED CMAKE_AR)
    get_filename_component(ar_prog ${CMAKE_AR} NAME)
    find_program(code_coverage_ar cs${ar_prog}
        PATHS ${wrapperdir}
        REQUIRED NO_DEFAULT_PATH)
    set(CMAKE_AR "${code_coverage_ar}"
        CACHE FILEPATH "CoverageScanner wrapper for ar" FORCE)
endif()

mark_as_advanced(
  cocopath
  code_coverage_c_compiler code_coverage_cxx_compiler code_coverage_linker code_coverage_ar
)

The file `squishcoco-gcc.cmake`

This file is needed to instrument a compilation with GCC. It must be in the same directory as squishcoco.cmake.

set(CMAKE_C_COMPILER gcc)
set(CMAKE_CXX_COMPILER g++)
set(CMAKE_AR ar)
set(CMAKE_LINKER gcc)

include(squishcoco.cmake)

The file `squishcoco-clang.cmake`

This file is needed to instrument a compilation with Clang. It must be in the same directory as squishcoco.cmake.

set(CMAKE_C_COMPILER clang)
set(CMAKE_CXX_COMPILER clang++)
set(CMAKE_AR ar)
set(CMAKE_LINKER clang)

include(squishcoco.cmake)

The file `squishcoco-visualstudio.cmake`

This file is needed to instrument a compilation with Microsoft Visual C/C++. It must be in the same directory as squishcoco.cmake.

set(CMAKE_C_COMPILER cl)
set(CMAKE_CXX_COMPILER cl)
set(CMAKE_AR lib)
set(CMAKE_LINKER link)

include(squishcoco.cmake)

Misleading CMake output under Windows

At least in version 3.20 and when run under Windows, CMake has a misleading output:

C:\cmake -C\somepath\squishcoco-visualstudio.cmake
-- Building for: Visual Studio 16 2019
-- Selecting Windows SDK version 10.0.22621.0 to target Windows 10.0.22631.
-- The C compiler identification is MSVC 19.29.30154.0
-- The CXX compiler identification is MSVC 19.29.30154.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: C:/Program Files (x86)/Microsoft Visual Studio/2019/Professional/VC/Tools/MSVC/14.29.30133/bin/Hostx64/x64/cl.exe - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: C:/Program Files (x86)/Microsoft Visual Studio/2019/Professional/VC/Tools/MSVC/14.29.30133/bin/Hostx64/x64/cl.exe - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Configuring done
-- Generating done

The output suggests that the project still uses the original compiler (cl.exe) and not the wrapper, but that is not true: A project that is configured with squishcoco-visualstudio.cmake actually produces instrumented code.

When in doubt whether a project is compiled with Coco, look into CMakeCache.txt. If it contains lines like this,

//CoverageScanner wrapper for C++ compiler
CMAKE_CXX_COMPILER:FILEPATH=C:/Program Files/squishcoco/cscl.exe

then the Coco wrapper is used and instrumentation enabled.

Creating your own settings file

With these examples, it should be easy to customize the settings file for other compilers. It is only necessary to set the names of the programs used, not their full paths.

Instrumentation with a toolchain file

Note: This is an older method that only works when there is no toolchain file already in use. It is left in the documentation for the cases in which it is still needed.

When Coco is used with CMake, the changes are partially dependent on the toolchain that is used for compilation. We will now first describe the addition of a new build type, which is independent from the toolchain, and then the additional changes for Microsoft^® Visual Studio^® and GNU GCC.

Adding new build type for instrumented compilation

The first step is independent of the toolchain that is used. Its purpose is to declare the CMake variables that are used to specify the instrumented compilation. In CMake this is done by declaring a build type, which we will here call COVERAGE.

To do this, add to the to CMakeLists.txt file the following lines. The variable COVERAGE_FLAGS in the first line specifies the CoverageScanner command line options. Change its value to fit your needs. Only --cs-on must always be present.

SET(COVERAGE_FLAGS "--cs-on --cs-count")
SET(CMAKE_CXX_FLAGS_COVERAGE
    "${CMAKE_CXX_FLAGS_RELEASE} ${COVERAGE_FLAGS}" CACHE STRING
    "Flags used by the C++ compiler during coverage builds."
    FORCE )
SET(CMAKE_C_FLAGS_COVERAGE
    "${CMAKE_C_FLAGS_RELEASE} ${COVERAGE_FLAGS}" CACHE STRING
    "Flags used by the C compiler during coverage builds."
    FORCE )
SET(CMAKE_EXE_LINKER_FLAGS_COVERAGE
    "${CMAKE_EXE_LINKER_FLAGS_RELEASE} ${COVERAGE_FLAGS}" CACHE STRING
    "Flags used for linking binaries during coverage builds."
    FORCE )
SET(CMAKE_SHARED_LINKER_FLAGS_COVERAGE
    "${CMAKE_SHARED_LINKER_FLAGS_RELEASE} ${COVERAGE_FLAGS}" CACHE STRING
    "Flags used by the shared libraries linker during coverage builds."
    FORCE )
SET( CMAKE_STATIC_LINKER_FLAGS_COVERAGE
    "${CMAKE_STATIC_LINKER_FLAGS_RELEASE} ${COVERAGE_FLAGS}" CACHE STRING
    "Flags used by the static libraries linker during coverage builds."
    FORCE )
MARK_AS_ADVANCED(
    CMAKE_CXX_FLAGS_COVERAGE
    CMAKE_C_FLAGS_COVERAGE
    CMAKE_EXE_LINKER_FLAGS_COVERAGE
    CMAKE_SHARED_LINKER_FLAGS_COVERAGE
    CMAKE_STATIC_LINKER_FLAGS_COVERAGE
    COMPILE_DEFINITIONS_COVERAGE
)

These commands take the compiler and linker flags of the Release build type and add to them the coverage flags. If you want to use instead the flags of another build type, replace the suffix _RELEASE in this code with the name of another build type, such as _DEBUG.

Microsoft Visual Studio

In Visual Studio, we need to make the new Coverage build type visible to the IDE. To do this, we add an item to the configurations list in in CMakeSettings.json that is based on your Release configuration.

{
"configurations": [
     "_comment" : "other configurations here... ",
      {
        "name": "CodeCoverage-x64-Release",
        "generator": "Ninja",
        "configurationType": "Release",
        "buildRoot": "${projectDir}\\out\\build\\${name}",
        "installRoot": "${projectDir}\\out\\install\\${name}",
        "cmakeCommandArgs": "-DCMAKE_TOOLCHAIN_FILE=cl.cmake -DCMAKE_BUILD_TYPE=COVERAGE",
        "buildCommandArgs": "",
        "ctestCommandArgs": "",
        "inheritEnvironments": [ "msvc_x64_x64" ],
        "variables": []
      }
   ]
}

The important detail here is the cmakeCommandArgs which tells cmake to use the cl.cmake toolchain file, and to use the COVERAGE build type. The other arguments/variables can be copied or customized from another working configuration.

Compilation with Microsoft NMake

In a project that is compiled with NMake:

Create a toolchain definition file cl.cmake which replaces the compiler and linker with their CoverageScanner wrappers.

For example:

# this one is important
SET(CMAKE_SYSTEM_NAME Windows)

# specify the cross compiler
FILE(TO_CMAKE_PATH "$ENV{SQUISHCOCO}/visualstudio" SQUISHCOCO)
SET(CMAKE_C_COMPILER ${SQUISHCOCO}/cl.exe
    CACHE FILEPATH "CoverageScanner wrapper" FORCE)
SET(CMAKE_CXX_COMPILER ${SQUISHCOCO}/cl.exe
    CACHE FILEPATH "CoverageScanner wrapper" FORCE)
SET(CMAKE_LINKER ${SQUISHCOCO}/link.exe
    CACHE FILEPATH "CoverageScanner wrapper" FORCE)

Create a Makefile project. Set the toolchain to the CoverageScanner wrapper and the build mode to COVERAGE.

For example:

cmake.exe -DCMAKE_TOOLCHAIN_FILE=cl.cmake -DCMAKE_BUILD_TYPE=COVERAGE \
          -G "NMake Makefiles" <i>path of cmake project</i>

Build the project with nmake.

Compilation with GNU GCC

The following must be done in a project that is compiled with gcc:

Create a toolchain definition file gcc.cmake which replaces the compiler and linker with their CoverageScanner wrappers.

For example:

find_program(CODE_COVERAGE_GCC gcc
    PATHS /opt/SquishCoco/wrapper/bin "$ENV{HOME}/SquishCoco/wrapper/bin"
    NO_DEFAULT_PATH )
find_program(CODE_COVERAGE_GXX g++
    PATHS /opt/SquishCoco/wrapper/bin "$ENV{HOME}/SquishCoco/wrapper/bin"
    NO_DEFAULT_PATH )
find_program(CODE_COVERAGE_AR ar
    PATHS /opt/SquishCoco/wrapper/bin "$ENV{HOME}/SquishCoco/wrapper/bin"
    NO_DEFAULT_PATH )

# specify the cross compiler
SET(CMAKE_C_COMPILER "${CODE_COVERAGE_GCC}"
    CACHE FILEPATH "CoverageScanner wrapper" FORCE)
SET(CMAKE_CXX_COMPILER "${CODE_COVERAGE_GXX}"
    CACHE FILEPATH "CoverageScanner wrapper" FORCE)
SET(CMAKE_LINKER "${CODE_COVERAGE_GXX}"
    CACHE FILEPATH "CoverageScanner wrapper" FORCE)
SET(CMAKE_AR "${CODE_COVERAGE_AR}"
    CACHE FILEPATH "CoverageScanner wrapper" FORCE)

Create a Makefile project. Set the toolchain to the CoverageScanner wrapper and the build mode to COVERAGE.

For example:

cmake -DCMAKE_TOOLCHAIN_FILE=gcc.cmake -DCMAKE_BUILD_TYPE=COVERAGE \
      -G "Unix Makefiles" <i>path of cmake project</i>

Build the project with make.

Qt framework

Note: Newer Qt versions also support CMake as its build system. The instructions in the CMake chapter apply to Qt projects too.

qmake

qmake is a tool that is used by Qt to generate a makefile in a platform-independent way, using as specification a so-called project file. It is also used by Qt Creator.

By default, qmake chooses the programs that are used for compilation. We can use the Coco wrappers by setting some of qmake's variables to new values. This can be done by putting some declarations into the qmake project files. Since one needs to build the project with and without coverage, the new definitions must be put into a scope. A scope is a region in a qmake project file that can be activated on demand.

The following listing shows a template for such a scope, named CoverageScanner, which should be sufficient for most projects.

CodeCoverage {
    COVERAGE_OPTIONS =

    QMAKE_CFLAGS   += $$COVERAGE_OPTIONS
    QMAKE_CXXFLAGS += $$COVERAGE_OPTIONS
    QMAKE_LFLAGS   += $$COVERAGE_OPTIONS

    defineReplace(toCoco) {
        cmd = $$1
        path = $$take_first(cmd)
        prog = $$basename(path)

        return(cs$$prog $$cmd)
    }

    QMAKE_AR = $$toCoco($$QMAKE_AR)
    QMAKE_CC = $$toCoco($$QMAKE_CC)
    QMAKE_CXX = $$toCoco($$QMAKE_CXX)
    QMAKE_LIB = $$toCoco($$QMAKE_LIB)
    QMAKE_LINK = $$toCoco($$QMAKE_LINK)
    QMAKE_LINK_SHLIB_CMD = $$toCoco($$QMAKE_LINK_SHLIB_CMD)
}

Here we also set the variables QMAKE_LINK_SHLIB and QMAKE_AR, which contain the names of the command to link shared libraries and that to generate archives. Furthermore, you can use COVERAGE_OPTIONS to set coveragescanner command line options (see List of options) to customize the project. An empty value for COVERAGE_OPTIONS will also work and results in a default instrumentation.

In a small project, the CodeCoverage scope may then be copied to all profile files of the project, i.e. those that end in .pro. In fact, it is enough to insert them only into those files that actually compile code and not those that only include other files. If the project is larger, it has very often a file with common settings that is included by all profiles: This is then the most convenient place to insert the CodeCoverage scope only once.

The new coverage scope is by default inactive. To enable code coverage in a project you want to built, just add the name of the scope to the CONFIG variable when configuring it with qmake:

$ qmake CONFIG+=CodeCoverage

moc

The Meta-Object Compiler (moc) generates some methods for each class derived from QObject. For example, the translation function tr, the source code for all signals, the cast operator qt_cast, …In order to instrument the code using the Qt Framework and not moc-generated code, CoverageScanner provides the command line options --cs-qt3 for Qt3 and --cs-qt4 for Qt4 to Qt6. They are enabled by default.

In this case:

Q_OBJECT macro is no longer instrumented.
All signals are instrumented in order to track their emission.
The glue code necessary for the signal/slot mechanism is not instrumented.
The code of Q_FOREACH macro is not instrumented in Qt4.

`qbs`

To use CoverageScanner with the Qt Build Suite (qbs), set it up as a toolchain. You can then use the toolchain for all qbs projects.

To set up CoverageScanner as a toolchain, issue the following command:

qbs setup-toolchains --type gcc /opt/SquishCoco/bin/csgcc csgcc

For Unix-based operating systems, some additional configuration steps are necessary:

qbs config profiles.csgcc.cpp.archiverPath /opt/SquishCoco/bin/csar
qbs config profiles.csgcc.cpp.linkerName csg++
qbs config profiles.csgcc.cpp.nmPath /opt/SquishCoco/bin/csgcc-nm

The csgcc toolchain can then also be used as base profile for Qt projects:

qbs setup-qt /opt/Qt/bin/qmake qt-csgcc
qbs config profiles.qt-csgcc.baseProfile csgcc

SCons

To use Coco with SCons:

Prepend the path of CoverageScanner's wrapper (csgcc, cscl, and son on) to the PATH environment variable. The PATH environment variable should be set to be able to execute CoverageScanner wrappers.
Set CC, AR and LINK variables to the corresponding CoverageScanner wrapper. For example: when using Microsoft Visual Studio compiler, set CC to cscl.exe, LINK to cslink.exe, and AR to cslib.exe.

Note: Do no use absolute file paths to the compiler wrapper since some versions of SCons do not properly handle spaces in file names.
Add code coverage settings to exclude from the instrumentation for example files to the variables CCFLAGS, ARFLAGS and LINKFLAGS.

Here is a code snippet which can be used for Visual Studio command line tools:

import os
from os.path import pathsep

env = Environment()

# Add the path of Squish Coco compiler wrapper
env[ 'ENV' ][ 'PATH' ] = os.environ[ 'SQUISHCOCO' ] + pathsep + env[ 'ENV' ][ 'PATH' ]
# TEMP variable need to be defined
env[ 'ENV' ][ 'TEMP' ] = os.environ[ 'TEMP' ]
env[ 'ENV' ][ 'INCLUDE' ] = os.environ[ 'INCLUDE' ]

# Set the compiler to Squish Coco wrappers
env[ 'CC' ]   = 'cs' + env[ 'CC' ] ;
env[ 'AR' ]   = 'cs' + env[ 'AR' ] ;
env[ 'LINK' ] = 'cs' + env[ 'LINK' ] ;

# Code coverage settings
coverageflags = [ '--cs-count' ]
env[ 'CCFLAGS' ]   = env[ 'CCFLAGS' ] + coverageflags ;
env[ 'ARFLAGS' ]   = env[ 'ARFLAGS' ] + coverageflags ;
env[ 'LINKFLAGS' ] = env[ 'LINKFLAGS' ] + coverageflags ;

To correctly set the build environment, you must start the build from the Visual Studio's developer prompt (available through the start menu) or the Coco's console provided by Build Environment Selection.

Setup Qt Creator

Coco v7.2.1 ©2024 The Qt Company Ltd.
Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.

Support for Build Automation Systems

Make and its variants

GNU Make

Microsoft NMake

Microsoft MSBuild

CMake

Instrumentation with a preloaded script

The file squishcoco.cmake

The file squishcoco-gcc.cmake

The file squishcoco-clang.cmake

The file squishcoco-visualstudio.cmake

Misleading CMake output under Windows

Creating your own settings file

Instrumentation with a toolchain file

Adding new build type for instrumented compilation

Microsoft Visual Studio

Compilation with Microsoft NMake

Compilation with GNU GCC

Qt framework

qmake

moc

qbs

SCons

The file `squishcoco.cmake`

The file `squishcoco-gcc.cmake`

The file `squishcoco-clang.cmake`

The file `squishcoco-visualstudio.cmake`

`qbs`